MAGLOC®

Some feedbacks from our customers:
on Glock grip tape:

great product, as described
Mikel V. - IN

Fast shipping. Exactly as advertised. Highly recommend this seller!
Wayne H. - KS

on XD grip tape

Very nice product, and people too!
Robin A. - IN


*********************************************************

Grip tape for Glock Pistol $11.50

 

**Unlike most grip tapes that provide traction on both sides of the handles only, this one provides traction of all sides. **

Introduction:

Glock pistol is made of polymer material and if handle with a wet or sweaty hand, it might be slippery and affect the natural pointing. To solve this problem, some shooters purchase different types of non-slip tape and roll their own while some purchase the pre-cut one form various manufacturers. To provide the best traction, or approach is to make the pre-cut tape that provides traction on all sides. After testing different non-slip materials with the shooters and 3M advisor, we believe that we now have one of the best pre-cut grip tapes for the Glock shooters.

Features:

Provides traction on all sides of the handle.

Provides 60% to 80% more traction on the pistol (depends on the moisture condition).

Reduces muzzle jump.

Improves shooting speed & accuracy

Rubber texture, would not worn out clothing.

No modification required

Specification:

1. Made of 3M Safety Walk #310 rubber texture slip-resistant tape. The best material for this application.

2. Fits all large size Glock pistols i.e. G17, 20, 21, 22, 24, 25, 31, 32, 34, 35, & 37. Need minor trimming to fit compact and sub-compact Glock pistols.

3. Weight all parts total 0.28 oz (8 gram).

4. Thickness 0.049 (1.25 mm).
**Please note that some shooting competitions have a limit on the use of grip tape on the pistol. **

Total Grip Tape Parts in package 14 pieces

1. Side panel 2 pieces.

2. 0.95 (24.1mm) x 0.49 (12.4mm) 2 pieces

3. 1.58 (40.3mm) x 0.49 (12.4mm) 10 pieces


Installation:

1. Make sure the gun is not loaded.

2. Make sure the applied area is free from dirt, moisture, gun oil or oil of any type.
You can try taping a masking tape (or any other type of tape) onto the gun handle for cleanness testing.   If the tape comes off, so will our grip tape.

3. Line up the parts on the pistol and make necessary adjustment or trimming before peeling off the backing.

4. Use the red line on the tape for centering when applying the tape on the front and back portion of the handle.

5. Tapes can easily be removed by starting from the edges without leaving severe markings on the pistol.

6. Test your firearms with this new fixture before actual using.

**Please have a qualified gunsmith to do the work for you if you are not comfortable to do your own installation.**

*****************************
Grip tape for Springfield XD Pistol $11.50

 

Specification:
1. Made of 3M Safety Walk #310 rubber texture slip-resistant tape. The best material for this application.
2. Fits all large size Springfield XD, HS 2000 pistols.
     **Need minor trimming to fit Sub - Compact XD pistols. **
3. Weight all parts total 0.28 oz (8 gram).
4. Thickness 0.049 (1.25 mm).
**Please note that some shooting competitions have a limit on the use of grip tape on the pistol. **



Total Grip Tape Parts in package 14 pieces
1.  Side panel 2 pieces.
2.  0.95 (24.1mm) x 0.49 (12.4mm) 2 pieces
3.  1.58 (40.3mm) x 0.49 (12.4mm) 10 pieces
 

Installation:
1. Make sure the gun is not loaded.
2. Make sure the applied area is free from dirt, moisture, gun oil or oil of any type.
You can try taping a masking tape (or any other type of tape) onto the gun handle for cleanness testing.   If the tape comes off, so will our grip tape.
3. Line up the parts on the pistol and make necessary adjustment or trimming before peeling off the backing.
4. Use the red line (if not clear, mark one your self) on the tape for centering when applying the tape on the front and back portion of the handle.
5. If required, tapes can easily be removed by starting from the edges without leaving severe markings on the pistol.   Once removed, it cannot be reuse.
6. Test your firearm with this new fixture before actual using.
**Note: If you are not comfortable with the installation procedures described
   below, please have the work done by a qualified gunsmith. **

 

*****************************

Grip Tape for SW99, Walther P99 and similar Pistols $11.50

Specification:
1. Made of 3M Safety Walk #310 rubber texture slip-resistant tape. The best material for this application.
2. Fits all regular size SW99 and most other types of pistols.
3. Weight all parts total 0.28 oz (8 gram).
4. Thickness 0.049 (1.25 mm).
**Please note that some shooting competitions have a limit on the use of grip tape on the pistol. **


Total Grip Tape Parts in package 20 pieces
1.  1.58 (40.3mm) x 0.40 (10.0mm) 2 pieces.
2.  0.95 (24.1mm) x 0.49 (12.4mm) 4 pieces
3.  1.58 (40.3mm) x 0.49 (12.4mm) 14 pieces

Installation:
1. Make sure the gun is not loaded.
2. Make sure the applied area is free from dirt, moisture, gun oil or oil of any type.
You can try taping a masking tape (or any other type of tape) onto the gun handle for cleanness testing.   If the tape comes off, so will our grip tape.
3. Line up the parts on the pistol and make necessary adjustment or trimming before peeling off the backing.
4. Use the red line (if not clear, mark one your self) on the tape for centering when applying the tape on the front and back portion of the handle.
5. If required, tapes can easily be removed by starting from the edges without leaving severe markings on the pistol.   Once removed, it cannot be reuse.
6. Test your firearm with this new fixture before actual using.
**Note: If you are not comfortable with the installation procedures described
   below, please have the work done by a qualified gunsmith. **


 

Back to:Products-banner.jpg

Back to Front Page of
Smart Lock Technology Inc.